Vertical shaft sand making machine model and technical parameters
The vertical shaft impact sand making machine has a new generation of products with a number of spontaneous research and development characteristics. It integrates various crushing modes and integrates. It has a simple and reasonable structure, low operating cost, dual motors, high production efficiency, and a vertical shaft sand making machine with a processing capacity of 40-650 tons. / Hourly, the equipment model is complete, and it is divided into waterfall and center feeding, full center feeding. The specific technical parameters are shown in the table below.
Waterfall and central feed: 80-650t/h
The material enters through the hopper, passes through the bulk material stack or the bulk material tray, and is divided into two parts by the material tray. One part enters the high-speed spinning wheel from the center of the material tray, and is rapidly accelerated in the wheel. Then at high speed, from throwing turns to internal ejection.
Feeding of the whole center: 40-365t/h
Unload or completely open the bulk material pile or bulk material tray, and all materials will fall directly into the distribution tray from the feed opening, and directly enter the spin wheel through the middle of the distribution tray.
|Model||VSI 7611||VSI 8518||VSI 9526||VSI 1140||VSI 1145||VSI 1150|
|Processing capacity (t/h)||Waterfall and central feed||80-180||140-260||200-380||300-520||350-610||360-650|
|Full center feed||40-90||70-130||100-190||160-260||180-355||190-365|
|Maximum feeding size
|Motor power (kw)||4P 110||4P 180||4P 264||4P 400||4P 440||4P 500|
|Dimensions (length × width × height) (mm)||4100×2250×2300||4160×2320×2900||4560×2450×2830||5500×2700×3100||5500×2700×3100||5500×2700×3100|
Note: The output will be different according to different materials, feed size and other factors
Phone: +86 17719851781
whatsapp: +86 17719851781