The details of sand making machine installation you need to know
Henan Dewo crusher Machinery specializes in the production of various sand making equipment. We are familiar with the structural components of each sand making machine. However, some friends of sand and gravel manufacturers are really lacking in this knowledge. Below, our engineers will popularize the sand making machines for everyone. Installation details and steps.
When installing sand making equipment, be sure to check the installation location of the equipment (this is generally the site foundation that must be prepared before the equipment), as well as the spare equipment to be installed. As long as all preparations are adequate, the future There are no problems during the installation process, so the following are all professional knowledge, which must be carefully watched.
1. Check the size and position deviation of the feed inlet and the quality of pouring: The surface must be clean, free of oil and debris, and no reinforced concrete leaking outside, cracks and missing corners are allowed.
2. The size and position deviation of the foundation should be in accordance with the following standards: check the outline size and the coordinate position of the foundation, the measurement requires that the vertical and horizontal axis error is less than 20mm, and the standard height of different parallel surfaces is less than 20mm: the total length of the slope error should be less than 20mm, upper The unevenness of the plane should be less than 5mm, the discharge end and the above data only allow negative but not positive.
3. When checking and accepting the equipment, the staff should check all the large and small parts and documents according to the packing list to check whether there is any deformation, etc., and the data should be recorded.
4. During installation, remove the protective film and dust and oil stains added during the packaging, and pre-test and pre-assemble the parts and key matching parts to avoid rework in the installation work and ensure the installation progress and installation quality.
Our company has professional engineering and technical personnel. For the above installation details, the company requires every technician to be fully proficient. To ensure the need to help customers with equipment installation, operation and maintenance in the later stage!
If you want to know more detailed technical information about sand making equipment, you can do not contact our company’s technology, and the company welcomes you to come to the company for on-site inspections and visits.
Phone: +86 17719851781
whatsapp: +86 17719851781