Structural characteristics of single-rotor impact crusher
The single counter-attack explosion machine is composed of simple, hammer, shape, counter-attack plate, tie rod chain curtain and so on. Two sections of counterattack board.
The warp triangle belt is composed of high speed (680r/min), and the crushed garbage is sent from the entrance of the section, through the chain curtain, into the first crack (the space between the hammer plate and the first counterattack plate and the chain curtain), and is The explosion fragments fell within the swing range of the blow hammer and were impacted by the blow hammer. The fragments after the impact are thrown to the first counterattack board at a high speed along the tangential direction of the motion of the blower, and are impacted again.
Then, the ruptured weight bounced directly from the counterattack board to the blower, and was ruptured by the impact for the third time. The impact moved along the line of the blower, and quickly threw it to the second counter-attack plate or the first counter-attack plate. The fourth impact rupture (the second counterattack and the blower form the second fragment). Continue to repeat the above-mentioned splitting process in the future until it is broken to the size of the grid (the distance between the small second section of the counterattack plate and the blower) and leaves from the lower discharge. There should also be material shocks during the upcoming movement.
The three pieces of the counter-explosive machine are connected with the hammer and the ground. When hitting the ball, you can make use of your full cognitive ability and play a better role. The connection of the counterattack plate is fixed on the freedom, and the other end is on the freedom with a rod pull rod. The bottom is at the end. When a non-cracked object falls into the crack cavity, the counterattack plate is subjected to separate pressure, and the rod moves backward, and the counterattack plate rotates a certain angle around its axis. The distance between the huge hammer and the counter-outlet plate makes The non-cracked objects can leave smoothly, so as to ensure that the parts of the machine are not damaged. The counterattack plate and pull rod are also the safety devices of the machine.
The screen is installed at the entrance of the feeding chain, which is the purpose of the feeding block flying out, the balcony. The pillars of the system shaft are supported on the main shaft positioning spherical roller bearings. At the two ends of the shaft passing through the seam, a sealing device should be installed on the ground to separate the upper and lower parts of the base. Stand directly on the ground for a long time and raise three small holes for advantage. The places where the lower wall of the machine may come into contact with materials are covered with high-strength steel. Liner.
Phone: +86 17719851781
whatsapp: +86 17719851781