How to solve the blockage in the work of the stone production line
It can be said that everyone who has used the crusher knows this. The crusher in the stone production line will occasionally block up during the work process. So how to solve the blockage of the crusher?
1. The blockage of the crusher in the stone production line is one of the common faults, which is also related to the problems in the design of the machine, but a large part of it is caused by the improper use of the operator.
Stone production line site
2. Excessive feeding speed and increased load are one of the reasons for blockage. So everyone must pay attention when using the crusher. During the feeding process, always pay attention to the problem of the large deflection angle of the ammeter pointer. If the rated current exceeds the rated current, it indicates that the motor is overloaded, and the motor will be burned out for a long time. In this case, the feed door should be reduced or closed immediately, or the feed mode can be changed, and the feed volume can be controlled by adding the feeder. There are two types of feeders: manual and automatic. The appropriate feeder should be selected according to the actual situation.
The above is an introduction to the blockage of crushing equipment often encountered in stone production lines. We are a professional manufacturer of stone production lines and sand production lines. The company has rich experience in this field for many years. Customers in need are welcome to come to our factory Survey.
Phone: +86 17719851781
whatsapp: +86 17719851781