How to improve the sand production rate of impact sand making machine
What aspects should be paid attention to in the sand production rate of the impact sand making machine?
In actual production, the primary yield and output of the impact sand making machine are too low, which are related to many factors, such as: material hardness, humidity, finished sand fineness, equipment maintenance, and its own quality, etc., let’s talk about it below. What needs to be paid attention to.
1. Different materials
At present, there are about 200 kinds of materials on the market, such as: soft materials (limestone, dolomite), hard materials (river pebble, granite, basalt), different materials, their own hardness, viscosity, humidity, etc. will have certain differences, impact The amount of sand produced by the sand making machine will vary when it is working.
The greater the viscosity of the material, the easier it is to adhere to the inner wall, which will seriously affect work efficiency;
The more fine powder in the material, the more it will affect the sand making, because these fine powders are easy to adhere to affect the transportation;
If the water content is high, it is easy to adhere, and it is also easy to block during the feeding and conveying process, resulting in the reduction of sand making capacity;
2. The fineness of finished sand is different
The higher the fineness requirement, that is, the finer the sand is required, the lower the capacity. If there is no special requirement, the fineness of the material is generally set to be medium fine.
3. Model differences
There are certain differences in the models of simpact sand making machines. The sand production rate and energy consumption are different during operation. When purchasing equipment, users should have a certain understanding of their own production and purchase the appropriate model. Otherwise, not only will the output be affected, but the cost may be more High cost.
Standardized operation and regular maintenance will also affect the sand production rate. If the operation is not standardized and regular maintenance is not done, the wearing parts of the equipment will be accelerated, the service life will be greatly reduced, and the production volume per unit time will be small.
5. Different quality
A high-quality equipment is not only energy-saving and environmentally friendly, but also can easily predict the output. Generally, manufacturers will choose new high-wear materials, which also provides a more favorable guarantee for continuous and safe production.
6. Scheme design
It is related to all the equipment of the entire sand making production line. If the output is 500t/h, then the impact sand making machine cannot be only required to reach 500 tons per hour. The processing capacity of the front jaw crusher, cone crusher and other equipment should also be matched, otherwise The output is definitely not up to, so the configuration must consider all factors in order to meet the requirements of sand production rate.
Phone: +86 17719851781
whatsapp: +86 17719851781