How to configure a sand production line?
With the gradual shortage of natural sand and the continuous increase of mining restrictions, machine-made sand has begun to replace natural sand as an important sand for construction, roads, railways, etc. The machine-made sand production line has small investment, fast return, simple operation, and basically unlimited space, so it has become a more enthusiastic investment method for investors.
There are many types of sand making production line equipment, each of which includes a variety of different models. Users should configure them according to actual production needs and material properties when purchasing to ensure that the production line can fully realize its value and create greater profits for users. . So how to configure the sand production line?
Principles of sand production line configuration
Manufacturers or users should fully consider the four basic principles of site size, material properties, production requirements, and capital investment when configuring sand production lines.
1. Combined with the scale of the production site
The user’s production site is limited. When configuring the production line, the overall floor area must be considered first. Only a production line with an overall area that matches the actual site can be selected. If it exceeds the site size, it cannot be installed and operated normally; if it is much smaller than the floor area The area will result in waste of space.
2. According to the nature of the material
There are many types of raw materials processed by the sand production line, including pebbles, granite, limestone, bluestone, silica, coal gangue, etc. When configuring the production line, it is necessary to choose a more reasonable plan based on the hardness, humidity, composition and other physical characteristics of the material.
(1) If it is a hard material such as pebbles, you can choose the combination of jaw crusher + cone crusher + sand making machine;
(2) For materials such as limestone and bluestone, the combined form of jaw crusher + counterattack crusher + sand making machine should be selected.
3. Match with production needs
According to different industrial application areas, there will be certain differences in the requirements of machine-made sand particle size and output. In some areas, the quality requirements of finished sand are relatively high, and higher-quality configuration schemes are required, and the process design will be relatively complicated. This point needs to be determined on a case by case basis.
4. Capital investment should be reasonable
In addition to considering the performance and capacity of the sand production line, users are also very concerned about capital investment. The configuration of low-investment and high-income production lines can be more recognized by users.
Phone: +86 17719851781
whatsapp: +86 17719851781