Horizontal crusher type price and model
Horizontal crusher, also known as horizontal crusher, is developed in accordance with the specific industrial and mining conditions and user needs of the domestic sand and gravel industry. It has simple structure, reliable work, small floor space and low operating costs.
Horizontal crushers belong to a large category, covering a wide range of areas, including more types. Commonly used are horizontal hammer crushers and horizontal impact crushers. It is recommended to consider the size of raw materials and output requirements, considering site conditions, investment budgets, etc. On the one hand, strive to obtain large output with small input.
1. Horizontal hammer crusher
Applicable materials: processing of crushed limestone, coal and medium hardness stones with a particle size of not more than 1000mm, compressive strength less than 200MPa;
Working principle: The material is crushed mainly by the impact of the hammer. At the same time, the material is fed into the machine from the upper feeding port, and is crushed by the impact, impact, shearing and grinding action of the high-speed moving hammer.
Performance advantage: It is an upgraded product, with a large feed inlet, and the finished material can be adjusted according to demand. Modular design. By changing the cavity type and conversion, it is also an alternative product for the old-fashioned jaw crusher and plate hammer crusher, reducing the process flow and improving Production efficiency, saving manpower and material resources, the finished product has no flakes, no smooth body, and polygonal and polygonal edges to ensure the compressive strength.
2. Horizontal impact crusher
Applicable materials: generally used for secondary crushing, for medium and fine crushing processing, processing various medium hardness and soft stones with particle size not exceeding 800mm and compressive strength not exceeding 350MPa, such as limestone, coal gangue, concrete, etc.;
Working principle: It is mainly crushed by impact. Driven by the motor, the rotor rotates at a high speed. After the material enters the crusher, it hits and crushes with the plate hammer on the rotor, and then is thrown to the counterattack device to crush again, and then from The impact lining board springs back to the hammer action area to break again. This process is repeated. The material enters the first, second, and third impact chambers from large to small, and is repeatedly crushed until the required particle size is discharged from the discharge port.
Performance advantages: The refined design of the rotor and cavity type, speed and power are reasonably matched to meet different application options. The gap between the impact plate and the blower can be easily adjusted, and the output size can be effectively controlled. The particle shape is good and the stone powder is less, which is better for the application. Material requirements, the hammer head is made of high manganese steel and is combined, which saves a lot of wear-resistant alloy materials and reduces production costs.
Phone: +86 17719851781
whatsapp: +86 17719851781