Crusher prices and suppliers for breaking stones
Stones are lumpy or oval, rough stones and smooth stones. The main ingredients are calcium carbonate and silicon dioxide. The texture is firm, brittle and hard, and is mainly used for the manufacture of stone tools. The crushing of stones requires the use of crushers. Because there are so many manufacturers of crushers on the market, there are also many types and models of crushers. Customers may have some difficulties in choosing. I don’t know which one to choose. The crusher is suitable for crushing stones.
Several common stone crushers
Under normal circumstances, the commonly used crushers for crushing stones include jaw crushers, cone crushers, single-stage crushers, compound crushers and fine crushers.
Jaw crusher is a kind of crushing equipment that is widely used at present. This equipment can be used for the primary crushing operation of stone, and can crush large pieces of stone. There will be no failures in the crushing process. See below for performance advantages.
a. The design of the crushing cavity is relatively deep, which can handle a large amount of stones, which improves the crushing capacity and output of the equipment, and the economic benefits of customers are also improved.
b. In the process of crushing the stone, the equipment runs very smoothly, the probability of failure is very low, and all parts are made of good materials, and there will be no wear.
c. The environmental protection effect is good, the surrounding environment is improved, the noise is low, and the vibration is small. Even if you work at night, it will not affect the lives of people around you.
The cone crusher is mainly used to crush medium-sized stones. The crushing effect is very significant. The finished stone after crushing has uniform particle size and excellent particle shape. It is a very good stone crusher with many performance advantages. See below for details. .
a. Convenient operation and maintenance. All parts and components can be disassembled and installed from the top or the side. There is no need to dismantle other parts. The maintenance is very convenient and saves a lot of maintenance time.
b. Large crushing ratio and high production efficiency. The better combination of high speed and stroke improves the crushing ratio and production efficiency of the equipment, thereby increasing the economic benefits of customers.
c. Low consumption of wearing parts and long replacement period. All parts are protected against wear, maintenance costs are reduced to a lower level, and operating costs are reduced.
The single-stage crusher is mainly used for crushing stones with compressive strength less than 150Mpa. It can crush large stones to the required particle size at one time, which not only simplifies the process flow but also saves production costs, which is very good A stone crusher has the following advantages.
a. The stone crushing operation can be carried out in any environment without affecting the crushing effect of the equipment, and the particle size of the crushed stone is very uniform.
b. Low noise and low vibration during operation. More importantly, the environmental protection effect reaches the national environmental protection standard, which improves the surrounding environment and does not affect the lives of people around it during work.
c. Energy-saving and consumption-reducing, high output, the output of stone crushed by this equipment is greatly increased, which not only improves the crushing capacity, but also improves the economic benefits of customers.
The compound crusher has a very strong crushing ability and is widely used in the market. The crushed stone has a very significant effect, the finished product has a very uniform particle size, and there are many performance advantages. See below for details.
a. The crushing ratio is large, and the particle size of the stone can be adjusted within a certain range, which effectively controls the particle size of the stone and meets the needs of customers.
b. Because there is no screen bar, it can crush stones with large water and mud content, and there will be no blockage, and it will not affect the normal operation of the equipment.
c. When non-crushed materials enter the crushing chamber, they can be discharged by themselves without causing damage to the equipment. The structural design is special, the rotor is hardly worn, and the replacement of parts is very convenient.
The fine crushing sand making machine is actually what we call the fine crushing machine. The performance of the equipment has reached the international advanced level. It is a practical, safe and reliable crushing equipment. It is very suitable for stone crushing operations and has a very good energy-saving and consumption-reducing effect. Compared with the traditional fine crusher, it can save energy by more than 50%. In addition, the fine crusher has the following performance characteristics.
a. Simple structure, convenient operation and maintenance, and large production capacity, which improves the crushing capacity of the equipment and the output of stones, and the overall economic benefits of the enterprise also increase.
b. The maintenance cost is low. Because the equipment is made of durable materials, the corresponding quality and performance are very good. During the operation, the probability of failure is very low, which reduces the maintenance cost.
c. The production cost is low and the price is affordable, but the quality of the equipment is very good, stable operation, low noise, low vibration, high output, and environmental protection.
Phone: +86 17719851781
whatsapp: +86 17719851781